Fiat 850 spider engine swap




Fiat 850 spider engine swap

Article Navigation:
  • Photo
  • Fiat Spider: Uptick in Values for Clean Survivors? | Totally That Stupid
  • Video
  • RELATED PAGES
  • to make a Fiat fast? Engine swap is possible, but most of what I've read about swapping into an is . My brother had an Spider.

    Mar 12, Has anyone had experience performing engine swaps using more anyone know any more about this vw aircooled into a fiat spider swap.

    Purchased a Fiat Sports Coupe that's not too. The GTA good for that, they can fit, and my Alfa Spider is better as Not sure what additional loads you would have to consider swapping to rear engine but its going to.

    Fiat 850 spider engine swap

    Fiat 850 spider engine swap

    That had to hurt! If you buy it, I still have my oil plug wrench from mine, I will give you. Myself and I believe a few others have added head work, different cams Mark's FI cams adjustable cam wheels , oversized pistons, headers, lightened flywheel and have been happy with the results. I'll probably have more questions soon, as "next summer" sometimes gets shortened to "next month" when I get impatient.

    Fiat 850 spider engine swap

    Fiat 850 spider engine swap

    Fiat 850 spider engine swap

    Fiat 850 spider engine swap

    Fiat 850 spider engine swap

    Eighth Furst Annual Fiat Car Show and Swap Meet

    Welcome to Club Hot Rod! I want to register an account for free right now! For registered members this ad will NOT show. Well the past few scheduled shop nights and days have been a bust, between college open houses and extracurricular activities I was thinking maybe a with a powerglide so that you didn't go out doing that hot rodding stuff and get in trouble!

    Just trying to help you out! I used the Choice system for some therapy to get back in some kind of shape after my last pneumonia experience, it's a 50 mile drive to the VA but the Choice system got me with our local hospital and Page 1 of 2 1 2 Last Jump to page: Results 1 to 15 of I had purchased 2 wrecked donor cars, so I have a lot of extra parts except for the rear drive axles, which seem to strip out fairly quickly , so if anyone needs anything please let me know.

    Fiat 850 spider engine swap

    I want to put this car back together and make it reliable enough to use as a daily driver with significant Interstate driving. Has anyone had experience performing engine swaps using more common American engines and transmissions? The body is in good shape and my interior pieces are in excellent shape.

    I blew up the engine racing, but now I just want to build a daily driver - one that I could pass on to my son when he's old enough. Thank you, David Butler.

    Fiat 850 spider engine swap

    Register now for free! David,, check out www. Join Date Oct Location carthage Posts 8. Dave I have seen the following engine shoved in the back of an Fiat 's push rod and twin cams , VW air cooled units and VW Rabbit units complete transverse drive trian.

    I have installed a VW cc unit in the back of my Here is my advice. This unit will handle greater torque than the Fiat unit and has a wide range of optional gear ratios available. Also the VW transaxle accepts normal engine rotations. There is a sweet twin cam unit in a coupe that uses a VW trasnsaxle that you can view at: Join Date Aug Location marietta Posts 3. Join Date Sep Location jffjhfg Posts 2.

    I didn't ask the question initially, but I'm looking to do the same swap, and have a few specific questions. How do you mate the VW transmission to the Fiat hubs? What about mounts for the transmission and engine? Do you start with some VW mounts and weld them to brackets to fit the Fiat engine compartment?

    Fiat 850 spider engine swap

    Is there any other custom pieces I would need? Thanks, Patrick Fiat Spider not yet on the road. I fabricated the Transaxle front mount our a a piece of 10 awg sheet steel. It is a cut shape with one bend.

    I designed the mount to bolt to the body under the sway bar mounts. Two hole are match drilled to catch the factory transaxle mount. I made my half shafts out of one vw half shaft assembly that I cut in half. I then measured to the Fiat hubs to get the required additional length of each half shaft note: If I was to do this again I would cut the Fiat half shafts to the required length, but I wanted the ability to got back to stock if my conversion didn't work out.

    Abarth 124 Spider Engine Swap - Part 1



    • Подписаться по RSSRSS
    • Поделиться VkontakteVkontakte
    • Поделиться на FacebookFacebook
    • Твитнуть!Twitter

    Leave a Reply

    Return to Top ▲TOP ▲