Water pump replacement jeep cherokee




Water pump replacement jeep cherokee

Article Navigation:
  • Photo
  • Water pump replacement - Jeep Cherokee Forum
  • Video
  • RELATED PAGES
  • Shop for Jeep Cherokee Water Pump online today. coolant lights come on, it's time to consider a water pump replacement for Jeep Cherokee from AutoZone.

    If you're ready for a water pump replacement for Jeep Grand Cherokee, come to AutoZone for a quality part that meets or exceeds the original part's performance .

    Jeep Cherokee Water Pump Replacement costs between $ and $ on average. The parts and labor required for this service are.

    Water pump replacement jeep cherokee

    Water pump replacement jeep cherokee

    They're know to warp and sometimes crack. Don't reuse unless you have super low mileage or just changed it recently. Sometimes, if you print the list of parts and bring it to your local Autozone or which ever parts stores, sometimes they will match the price. Coolant leaks allow air into the cooling system, creating air pockets where hot spots can occur, damaging other components and increasing the risk of head gasket failure.

    Water pump replacement jeep cherokee

    Water pump replacement jeep cherokee

    Water pump replacement jeep cherokee

    Water pump replacement jeep cherokee

    Water pump replacement jeep cherokee

    Jeep Grand Cherokee Water Pump Replacement Costs | YourMechanic Estimates

    The water pump, also known as the coolant pump, circulates coolant through the engine's cooling system. The water pump pushes coolant through a vehicle's cooling system. The water pump is driven by an accessory belt at the front of the engine or by the timing belt, or by the timing chain. Water pumps require replacement if they begin to leak coolant or become noisy. Leaking water pumps can result in damage to the drive and timing belts, as well as cause the engine to overheat.

    A failed water pump can be caused by other problems in the cooling system, such as a failing thermostat, radiator, or head gasket. A worn water pump has far reaching effects. If the water pump is not maintaining proper coolant circulation the engine will overheat, causing leaks, possible head gasket damage, and ultimately a failed motor.

    Water pump replacement jeep cherokee

    Failure to shut down an engine while overheating will eventually cause stalling, necessitating a tow. Repair intervals vary greatly by vehicle and driving conditions. The water pump does not wear like a tire or a ball joint, but eventually the bearing or impeller can fail in the pump. When noisy, leaking, or unable to properly circulate coolant, the water pump needs to be replaced. The technician will check for leaks and wetness around the water pump area. With the engine running, they may also use a stethoscope to check for noise indicating wear of the water pump bearing.

    If visible, the belt driving the pump will be inspected, along with the water pump pulley to be sure the pump is being driven properly. In the case of electric water pumps on some newer cars, the engine's computer will be checked for codes, and the relevant tests will be performed to determine the proper repair.

    Water pump replacement jeep cherokee

    To replace the water pump, the cooling system is drained and the fan belt or timing belt and pulleys are removed. If the water pump is operated by a fan belt, the hose going from the water pump to the radiator is removed, as are the bolts securing the water pump to the engine. The water pump is removed from the engine, and the engine surfaces are cleaned. A new water pump and gasket are installed, and the cooling system is refilled with fresh coolant. If the water pump is operated by the timing belt, the timing belt covers, timing belt, and all related components are disassembled.

    The hardware securing the water pump to the engine is removed, and the water pump is removed from the engine. The surfaces are cleaned and a new water pump and gasket are installed. All timing belt—related components, fan belts, and pulleys are installed, and the cooling system is refilled with fresh coolant. Be sure to follow the specific procedures for your vehicle. Proper gasket handling, torque specs, and sealant usage are necessary for an effective repair.

    When refilling the cooling system, the manufacturer recommended coolant should be used. There are many bearing noises that could come from an engine bay. Proper care should be taken to diagnose them. The entire cooling system—including all of the coolant hoses and fittings, radiator, coolant fan s , and fan clutch if equipped —should be inspected when replacing the water pump.

    Water pump replacement jeep cherokee

    To help prevent future issues, we recommend replacing the thermostat when the cooling system has been opened for repairs e. The fan clutch may also be removed to access the water pump, and should be replaced if worn or leaking.

    When replacing the water pump, the drive belts may need to be removed, they should be replaced if worn. The water pump may be driven by the timing belt. It this case, it is common to replace the water pump when the belt is replaced. Due to the overheating risk, a car with a leaking water pump should not be driven.



    • Подписаться по RSSRSS
    • Поделиться VkontakteVkontakte
    • Поделиться на FacebookFacebook
    • Твитнуть!Twitter

    Leave a Reply

    Return to Top ▲TOP ▲